Nanomanufacturing

Search results

Did you not find what you were looking for? Try the Advanced Search for more precise search options.

36 items matching your criteria.
6th New England International Nanomanufacturing Workshop - Sept. 11-12 [100%]
The goal of the workshop is to address moving nanotechnology from the laboratory to industry-floor manufacturing. The workshop will address current ...
Society of Manufacturing Engineers Promotes Micro-, NanoManufacturing [92%]
The Society of Manufacturing Engineers (SME) is taking on a ‘Myth-Busting’ campaign to speed adoption of micro- and nano-manufacturing techniques among their ...
Nanomanufacturing Handbook [88%]
<p>Breakthroughs in nanotechnology have been coming at a rapid pace over the past few years. This was fueled by significant worldwide investments by ...
Nanotech Brings Glowing Smiles [88%]
Research present in a forthcoming issue of the International Journal of Nanomanufacturing from Inderscience Publishers suggests that coating dental implants ...
Bosso, Christopher [88%]
Associate Professor, Department of Political Science, Northeastern University.
Busnaina, Ahmed [87%]
Ahmed A. Busnaina, Ph.D. is the William Lincoln Smith Chair Professor and Director of National Science Foundation’s Nanoscale Science and Engineering Center ...
Bringing nanotechnology to market [85%]
Northeastern University's Nanoscale Science and Engineering Center for High-rate Nanomanufacturing (CHN) has received a $2 million grant to help commercialize ...
Dr. Ahmed A. Busnaina: Moving NanoScale Discoveries to High-Rate Manufacturing [77%]
Dr. Ahmed A. Busnaina of Northeastern University (Boston, Mass.) focuses his research on bringing valuable nanoscale discoveries from lab into high-volume ...
Northeastern University [71%]
Nanotechnology research at Northeastern encompasses nanomanufacturing, nanomaterials, nanomedicince and bio-nanotechnology, and the societal impacts and ethics ...
Table of Contents [68%]
NSF Center for High-Rate Nanomanufacturing - Northeastern University [68%]
The Center for High-rate Nanomanufacturing is focused on developing tools and processes that will enable high-rate/high-volume bottom-up, precise, parallel ...
Singh, Manoj [67%]
Doctor Manoj Singh is presently Investigator and Post-Doctoral Fellow at the Centre for Mechanical Technology and Automation at University of Aveiro (TEMA).
Bakhtari, Kaveh [66%]
His research focuses on numerical analysis of processes that will enable high-rate/high-volume assembly of nanoelements (such as carbon nanotubes, ...
Microfabrication and Nanomanufacturing [65%]
Nanotechnology, seen as the next leap forward in the industrial revolution, requires that manufacturers develop processes that revolutionize the way small ...
Nanotechnology for Photovoltaics [62%]
Bosso, Christopher [62%]
Bio
The Nanotechnology and Society Research Group (NSRG) - Northeastern University [61%]
The Nanotechnology and Society Research Group (NSRG) is dedicated to the study of the societal dimensions of nanotechnology research, development, application, ...
Don't Miss 2007's Top Voices in Nanotech -- NSTI Nanotech 2007 Proceedings [59%]
Leeds Researchers To Earthquake-Proof Home with Auto-Released Nano-Polymers, Nanosensors [52%]
Nanoresearchers at the University of Leeds plan to employ auto-released nano-polymers and nano-based sensors to make houses more earthquake resistant.
Soft Lithography Shows "Large" Promise for Scaling Nano [50%]
Led by Teri Odom of Northwestern University, research funded by the National Science Foundation (NSF) has shown that an inexpensive and innovative way of ...
Next 16 items » [1] 2

Publications

Latest Research

Society of Manufacturing Engineers Promotes Micro-, NanoManufacturing

Posted by: Editor1 — on February 04, 2010

The Society of Manufacturing Engineers (SME) is taking on a ‘Myth-Busting’ campaign to speed adoption of micro- and nano-manufacturing techniques among their membership. The campaign comes as a recent survey of SME members found that of all those who expressed an interest in these techniques, only about half were applying them in products today.

6th New England International Nanomanufacturing Workshop - Sept. 11-12

Posted by: Editor1 — on July 25, 2008

The goal of the workshop is to address moving nanotechnology from the laboratory to industry-floor manufacturing. The workshop will address current developments and successes in transitioning research into commercial products and serve as a forum for industry, academia, and small business to interact and collaborate.

Researchers Build Nano Train, Motor and Track from CNT Pair

Posted by: Editor1 — on April 29, 2008

An international research team is using carbon nanotubes to build a nano-freight train – complete with a railbed to run on.

Researchers

Yavuz, Mustafa

Mustafa Yavuz, Ph.D.

Professor
University of Waterloo

Busnaina, Ahmed

Ahmed Busnaina, Ph.D

Director, The Center for High-rate Nanomanufacturing (CHN)
Northeastern University

Jackson, Mark

Mark Jackson, Ph.D.

Associate Professor
Purdue University

Institutions

The University of Notre Dame

The University of Notre Dame

The University of Notre Dame, founded in 1842 by Rev. Edward F. Sorin, C.S.C., of the Congregation of Holy Cross, is an independent, national Catholic university located in Notre Dame, Ind., adjacent to the city of South Bend and approximately 90 miles east of Chicago.

Biomimetic Connections, LLC

Biomimetic Connections, LLC

Biomimetic Connections, LLC is a California-based firm established in 2002 to advance the commercialization of bio-inspired and biomimetic IP. Through our suite of biomimetic and bio-inspired IP portfoilios, BioParadigm ACCESS, we serve corporations, bio/material scientists and product design engineers across the engineering spectrum seeking to identify, utilize and commercialize research outcomes derived from 'biological design paradigms' (tm)

The Center for Nanoscience and Nanotechnology - Georgia Tech

The Center for Nanoscience and Nanotechnology - Georgia Tech

Professor Zhong L. Wang is the director of his nanoscience and nanotechnology research group in the School of Materials Science and Engineering of the Georgia Institute of Technology.